Home > Paint Finishes > Tikkurila / Valtti

Luja 7 Acrylic Matt Anti Mould

Send to a friend Print

Description

Luja Acrylic Matt 7

Description

Special acrylate paint. Contains anti-mould agent that protects the paint film.

Product features

High performance scrub resistant acrylic matt with mould and anti microbial inhibitors.

Interior painting of concrete, plaster, filler treated, brick, cardboard, chipboard and wood fibre board surfaces. Suitable for both new and previously painted surfaces.

Recommended uses

Interior walls and ceilings in premises in which high wash and wear resistance is required such as lobbies, staircases, hospital corridors, patient rooms and other surfaces which are subject to higher than normal stress. The product has an approval for indirect contact in food industry (Finnish Food Act 23/2006).

zoom

TECHNICAL DATA

The paint is suitable for interior walls

The coverage of the paint on rough surfaces

5
m2/l

The coverage of the paint on smooth surfaces

8
m2/l

Base paints

A and C

Colour Range

Tikkurila Symphony Colour Card

Gloss grade

Matt

Coverage

Approx. 5 - 8 m2/l.

Can sizes

Base paint A: 0,9 l, 2,7 l, 9 l, 18 l.
Base paint C: 0,9 l, 2,7 l, 9 l.

Thinner

Water

Application method

Brush, roller or spray. For airless spray application use nozzle 0.015" - 0.021" , Thinning: 0 - 5 vol-%

Drying time at 23°C and 50% relative air humidity

Touch dry in approx 2 hours. Re-coatable after approx. 4 hours.

Wash resistance

Very good. Withstands washing with cleaning detergents and disinfectants used in hospitals.

Chemical resistance

Resists solvents, e.g. White Spirit

Heat resistance

85 °C , ISO 4211-2 and ISO 4211-3

Wear resistance

Wet-scrub resistance SFS-EN 13300 class I, ISO 11998

Solids volume

Approx. 40 %

Density

1.2 kg/l, ISO 2811

Storage

Protect from frost.

Product code

6996001/3

MED Certificate

MED B7151 Luja finishing paint

APPLICATION DETAILS

Application conditions

The surface to be painted must be dry, the temperature of the air at least +5 ºC, and the relative humidity of the air below 80 %.

Preparation

Unpainted surface:
Remove dirt and dust from the unpainted surfaces. If necessary, fill holes and cracks with suitable Tikkurila Presto filler. Sand the filler and remove sanding dust. Prime with Luja Universal Primer or Varma Primer.
Previously painted surface:
Wash down previously painted surfaces with Cleaning Agent (Maalipesu) according to instructions of use and let it dry. Remove loose, flaking paint with a scraper. Sand hard, glossy surfaces to a matt finish and remove sanding dust. Fill holes and cracks with a suitable Tikkurila Presto filler. Sand the filler and remove sanding dust. Prime with Ykköspohja, Luja Universal Primer or Varma Primer, if necessary.

Painting

Stir Luja finishing paint well before use. Apply two finishing coats by brush, roller or spray.

Cleaning of tools

Clean tools with water. Use of Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used to remove a bit harden paint from the brush.

Maintenance instructions

Cleanse the surfaces with neutral (pH 6 - 8) detergent using soft brush, sponge or cloth at the earliest 1 month after painting. Very dirty surfaces can be cleansed with lightly alkaline (pH 8 -10) detergent using e.g. a cleaning cloth or sponge. Rinse the surfaces carefully after cleaning. Follow the dilution instructions of the detergent manufacturer.
The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them lightly with a soft brush or damp cleaning cloth.

Maintenance treatment

Surfaces painted with Luja Finishing paint can be repainted with similar water-borne paint. See Preparation.

EU VOC 2004/42/EC-limit value

(cat A/a) 30g/l(2010). Luja Finishing Paint matt contains VOC max. 30g/l.

HEALTH AND SAFETY LABELLING
according to Regulation (EC) No. 1272/2008

Harmful to aquatic life with long lasting effects. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1) and 2-octyl-2H-isothiazol-3-one. May produce an allergic reaction. Wear protective gloves. Avoid release to the environment. This paint contains a biocidal product for the preservation of the dry film. Contains: 2-octyl-2H-isothiazol-3-one. This product contains a biocidal product for the preservation of the product during storage. Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1). A Safety Data Sheet is available on request.
Safety data sheet